BZJ-211 COLOR MARK SENSOR PACKING SENSOR in Pakistan
- 1)Color mark sensor
- 2)Design program:1,2……
- 3)Class to light path: 1. coaxial, 2. non coaxial
- 4)Class to light source: 1.single light source, 2. double light source
- 5)Color of light source: R: white, G: green
- 6)Class to logic: N-NPN, P-PNP
|Detecting method||Coaxial reflection|
|chromatogram of light||red, green , blue , white|
|Output type||NPN PNP|
BN : BROWN : +10-30VDC
BU: BLUE : -OV
BK: BLACK : switch signal output (NPN)
WH: WHITE: analog signal output (PNP)
Notice: 1: Be sure to check the power supply is in line with the DC12 prior to power – 24 v + / – 10%, the highest do not exceed 40 v, otherwise may damage the color mark sensor.
2: To ensure high stability test, to ensure that be two things: one is the detection distance of rated offset, such as offset of 12 + 2 mm, when installation, must be that the offset is 12 mm, so that we can make the switch to have 4 mm up and down vibration stability region, and in the offset to 10 mm, the upper and lower vibration area is significantly reduced.;2 it is strictly according to the steps to adjust sensitivity.
3: When installation should prevent direct light into the optical lens or shading to take appropriate measures.
4: Working environment temperature, humidity, vibration, shock and other corrosive gases, are likely to affect the work of photoelectric switch, please pay attention to try to eliminate these effects.
5 : Pay attention to protect optical lens clean at ordinary times, avoid lens stand up when installation, to minimize dust.
Model and technical parameters